To reduce friction & deterioration through the achievement of advanced lubrication technology!!
The primary benefit of the PowerUp products offer restoration of critical moving parts to Engine Transmission & Fuel systems. Fuel saving are expected with the use of NNL690-G, Diesel Fx, and Gen49D. Fuel saving can vary from each different application. The greater the friction related problem the greater the fuel savings are experienced.
Our products blend with lubricants becoming a part of that lubricant. Increasing the lubrications film strength of conventional synthetic & petroleum based lubricants.
EXTEND LUBRICATION INTERVALS:
Reduce wear metal counts and extend lubrication intervals. We recommend that oil samples are taken and given to your local oil supplier before lubrication intervals are extended.
HIGH FILM STRENGTH:
Provides lubrication that protects moving parts ( up to 200,000 PSI ) during metal to metal contact resulting in reduced friction, wear, thus lowering lubrication temperatures and extending equipment life.
PROTECTION AT EXTREME TEMPERATURES:
Use of our technology can withstand temperatures upward to 800 degrees Fahrenheit while untreated lubricants break down at considerably lower temperatures.
COMBATS WATER AND ANTIFREEZE CONTAMINATION:
PowerUp guards metal surfaces against water, antifreeze, and diesel fuel and gasoline dilution.
ELIMINATES DRY START-UP ABRASION:
Our technology offers a unique reversed ion technology to protect equipment a start up time.
PARTS REMAIN CLEAN AND MOVING SMOOTHLY:
One of the many features of our program is the ability to continuously clean carbon, sludge, and varnishes from vital parts (piston rings, valves, bearings etc.)
POUR POINT OF -60 DEGREES FAHRENHEIT:
Permits lubrication to flow more free during cold weather. This feature dramatically decreases friction and drag, allowing smoother, quieter start-up and operation at low temperatures.
PROTECTION AGAINST MAJOR DAMAGE:
When loss of antifreeze or overheating occurs, equipment can suffer severe damage to its internal components. Do to our leading technology the severity of this condition to the wear surface will be reduced to a minimum.
GLOBAL LUBRICATION KNOWLEDGE:
Following the introduction of our program you can expect (and will see) a distinct reduction of Equipment repairs, General Maintenance, Operating Cost, Equipment Downtime, Fuel Consumption, Breakdowns, and Part Failure.
RESTICTIONS FOR USE:
Do not use when wet clutch applications are using a metal to metal contact. For example a 1020 & a 1030 John Deere tractor is equipped with a metal to metal or brass composite plate for its final drive wet clutch unit. However, if treatment is made by mistake no damage will occur. What to do; simply drain the application and retreat without PowerUP. The reason treatment should not be made; the application will begin to slip. What makes this unit slip? PowerUp increases the film strength of lubrication thus creating slippage in extreme conditions. Slipping occurs only when the fiber is worn off of the clutch package surface. Slipping can also occurs when the applications are factory equipped with a metal to metal clutch packages. If more information is needed call or e-mail our company.