No.  In fact Power Up offers you an even higher level of comfort.  Not only are you covered by your manufacturers warranty, Power Up also has you covered with a 5million dollar warranty. To view a copy of this warranty click here.

The Power Up technology has an ability to reverse the wear molecule and create a negative ion. The negative ion then forms a marriage with the lubricant that its working with. Our technology can withstand 200,000 lbs of pressure to the wear surface, where grease and oil are used as lubricants. We treat the oil not the wear surface, other technology bonds to the wear surface, we do not.

In fall of 1991 Bill Mongin President of M.C.S. Inc. founded the M.C.S. Lubrication Program with the Power Up products. As of today we do not advertise on radio or television. However on Jan. 13 1998 this web site was started due to customer endorsement letters that we have received. ( Thank you valued customers!) In closing we are serving a little over 600 customers and are still in an infancy stage.

No we are not an additive, additives that are in lubricants will bond to the wear surface. We are a Oil Fortifier and we do not bond the wear surface. We increase the film strength of lubrication and are not classified as an additive. No this product does not contain chlorinated solvents. For more questions on these issues please contact our main office.

No you can remain purchasing your lubricants form your present supplier. We treat their lubricants and increase the film strength of that lubricant.

Yes you can extend your intervals safely with lower wear metal counts that are normally experienced on regular intervals. It is recommended by our company for our clients to perform spectral analysis for engine and gear box applications and particle analysis test for hydraulics.

Yes especially if the lubricants are running over 140 degrees. Example in hydraulics I have seen temperatures go form 240 degrees and drop down to 170 degrees. These results took approximately 30 days of operation.

Yes all of our customers will experience a reduction of bearing temperature and bearing failure. Our company and our products offer a 100% customer satisfaction guarantee.

Yes we are compatible with major brands of motor oil. For more information on this question please feel free to contact our company.

Yes we are compatible with major brand standard & high temperature greases. We also have the ability to work with synthetic greases. For more information on compatibility contact our company.

Yes in many cases we are seeing a reduction of oil consumption with engine applications.

No we are not, we are an environmentally friendly technology. If more information is needed on this subject you may contact our company.

Yes, PowerUp has been field tested by MCS Distribution for several years. The results have been lower operating tempeatures with improved lubrcity.

Yes, Gen49D is compatible with Bio Diesel Fuels. Gen49D has been field tested with Bio Diesel Fuels in Wisconsin for a little over 2 years with excellent results. The results have been lower fuel emissions, increased power, increased fuel savings, easier starts in cold weather. It has an excellent, anti wear, anti jell, anti fungus and water displacement package.

We recommend to our customers to purge all grease applications whenever possible. The reason we recommend purging is to push out contamination, reduce application temperatures and establish proper greasing intervals.

How to establish greasing intervals:  

1. Take a temperature reading of application. This should be done when applications has been running in full operation.
2. Grease with Thixogrease until the seal is broken and Thixogrease is coming out of the application.

Backing off of your greasing interval:

1. Grease application with Thixogrease, count your pumps each day you grease, it should be no more than one or two pumps. Keep backing off each day until you are pumping three or more pumps of grease into the application, it is now starting to use more grease. Stop here at this point; you have now established proper greasing intervals for this application.
2. Now that you have established your proper greasing interval we recommend that you take a temperature reading of application during its peak operation. This will be the acceptable operating temperature for this application.

This procedure is recommended by our company. This procedure has been established by our customers and is based on the results they have received since 1991. For information on results of the Thixogrease products click here.

No.  In fact Power Up offers you an even higher level of comfort.  Not only are you covered by your manufacturers warranty, Power Up also has you covered with a 5million dollar warranty. To request a copy of this warranty email [email protected].